Sam Allan Electrical
Call 0430 719 791 Quote

Hot water, oven & appliance installation

Electric hot water units, ovens, cooktops and underfloor heating. Replacements, upgrades and new connections.

Hot Water Ovens Appliances work by Sam Allan Electrical
Licence 306888C Fully insured Local to Smiths Lake Written quotes
What's involved

Replace, upgrade, or wire from new.

Electric hot water is usually a like-for-like swap. Sam isolates and disconnects the old unit, then connects and tests the new one. A plumber looks after the water side.

Ovens and cooktops are hardwired. A standard oven usually runs on its own circuit, and induction cooktops often need a dedicated 32A circuit or more. Sam runs the circuit, connects the appliance and tests it.

Underfloor heating connects to a thermostat and the switchboard. Sam connects the heating cables your installer has laid, mounts the thermostat and sets it up.

Appliance connections come with a compliance certificate where one is required.

When to call Sam

Replacing or adding.

Your hot water unit is leaking, getting old, or the element has burnt out.

You're renovating the kitchen and the new induction cooktop needs its own circuit because the old one was gas.

You're building a new bathroom and want heating under the tiles.

You're swapping the oven for one that's bigger or more powerful, and the existing connection needs upgrading.

How a job goes

Most jobs are straightforward.

  1. 01

    Confirm the spec

    Sam asks what you're installing or replacing. Often the spec sheet tells him what he needs to know.

  2. 02

    Quote

    Many appliance jobs can be priced over the phone or after one quick visit.

  3. 03

    Install

    The power goes off while the connection is made. Most simple swaps don't take long.

  4. 04

    Test and certify

    Sam tests everything and gives you a compliance certificate.

Can Sam replace my electric hot water unit?

+
Yes. For a like-for-like swap of a standard electric hot water unit, the electrical side is usually straightforward. Call Sam to check when he can get there. You'll also need a plumber for the water connections.

Does my induction cooktop need a new circuit?

+
Often, yes. Many induction cooktops need their own dedicated circuit, commonly 32A, and kitchens that used to have gas often don't have one. Sam can check the cooktop's specs and run a new circuit from the switchboard during your kitchen renovation.

Sam came out on a Saturday morning when our switchboard tripped and wouldn't reset. Diagnosed a failing safety switch, replaced it on the spot, and ran a full RCD test on the whole house. Booked him back for a proper switchboard upgrade two weeks later. Tidy work, fair price.

Mark T. · Pacific Palms

Got a Tesla Wall Connector installed before our new car arrived. Sam quoted on the phone, came out two days later, charger up and running in a few hours. Showed us how the app works. Pricing was straightforward.

Jane W. · Forster

Cold shower?

Call Sam to get it sorted.

0430 719 791 →